Micro Fogger MP - 619

MP Surgical is the major Micro Fogger MP - 619 Manufacturers in New Delhi. A micro fogger is a small device used to produce a fine mist or fog, often for various applications. It typically operates by heating a liquid solution or using ultrasound technology to create tiny water droplets that are released into the air as a fog or mist. Micro foggers are commonly used in several contexts: Micro foggers are used to disperse insecticides, pesticides, or repellents in a fine mist form to control and eliminate pests like mosquitoes, flies, and other insects. This method ensures thorough coverage and can reach difficult-to-access areas.

 

Specificatrion

Micro Fogger provides excellent control of droplet size, even for near-invisible 7-10 micron droplets needed by concentrated MP chemicals. The Micro Fogger can treat 2,000-4,000 cubic feet per minute, reducing application time and labor costs. And when you need high output and large droplets, the Micro Fogger is just as effective. It can deliver up to 150 ml/min in a mist of large (30 microns) droplets used in humidification, dust abatement, and sanitizing work. The advanced Micro Fogger can apply either oil- or water-based chemicals. And it's easy to calibrate when changing liquids.

Features

• Max. area coverage as compared to any other conventional fogger.
• 304 Grade Stainless Steel Body.
• Chemical Level Indicator. Comes with pre-fitted liquid flow control valve for ease of use.
• 100% Convenient, Portable & Easy to use.

CLEANING THE FOGGER

Normal Cleanup: When Fogging is complete, remove the suction tube from the liquid source and operate the fogger for one minute with the valve fully open. This will expel any liquid remaining in the fogger's internal lines. Transfer excess chemicals from the tank to an appropriate container. Cleanup of Difficult Liquids: After fogging a viscous liquid, emulsion, or solid suspension, begin with a normal cleanup (Step A). Then put the suction tube into an appropriate solvent for your fogging chemical (water for water-dispersible liquid, kerosene for oil-based liquids) and operate for 1-2 minutes flushing residual chemicals with clean solvents. Then again repeat Step A. Cleanup for Long-Term Storage: Remove all the liquid from the tank to eliminate the potential for long-term chemical attack on the tank, suction tube or tubing. Then follow Step AorB.

 

ABOUT PRODUCT

Mediomo Machine atomizes liquid into a fog, mist or spray of small droplets. It can atomize both water or oil-based solutions as well as emulsions and dilute suspensions of wettable powders.